8384062994

accumax105@gmail.com

Fri Jul 08, 2022

cytotoxic safety cabinet

DESCRIPTION

BIOHAZARD SAFETY CABINET Type A-2, Class II                        
                
Bio Safety Cabinet Class II Also Have An Open Front Design Provided With Negative Pressure Generation Module.  This Equipment Provides Recirculation Of Mass Flow Of HEPA Filtered Air.  This Type Of Bio Safety Cabinets Provides Excellent Protection To Users, Products And The Environment.         

Construction
Bio Safety Cabinet Is Designed To Conform To The United State Federal Standard 209B/BS5295 And Meets The Class 100 Conditions Along With British Standard 5726-Appendix A.  Our Units Are Fabricated Of Galvanized Iron Powder Coated/ Stainless Steel.  The Side Panels Made Out Of Heavy Plexi Glass Sheets Are Mounted On Anodized Aluminum Frames.  The Whole Unit Is Supplied With Manometer To Gauge The Pressure Drop In The Unit While Operation, Beside The Gas Cock, Power Socket Etc

Filter Assembly
Fitted With Fully Washable Synthetic Pre-Filter Units And Secondary High Efficiency Perfect Air Filters Made Of Mini Pleated Non Woven Fabric.  The Efficiency Of Our Filters Have A Rating Better Than 99.99% At DOP (Cold) And 99.97% At DOP (Hot).  Our Units Have The Capacity To Hold All Suspended Particles Of Size > 0.3 Micron.

Motor And  Blower Assembly:
Provided With Perfectly Balanced (Static As Well As Dynamic) Motor And Blower

Illumination:
Illumination At The Work Table By Means Of LED Lights Panel Concealed At The Upper Portion Of The Unit. 

Ultra Violet Light Is Incorporated In The Illumination Panel  Of Our Bio Safety Cabinets To Take Care Of The Sterilization Of The Existing Air Present In The Enclosure, Thus Ensuring The High Standard Of Cleanliness In Our Equipment Before The Commencement Of Actual Working.

Noise Level:
Our Bio Safety Is Designed To Ensure That The Work Enclosure Has Minimum Possible Vibration Levels And Noise Level Is Also Contained Below 70 db.


 Biosafety cabinet class ii, type a2 specification​:

Cleanliness   

Class 100

Velocity  

90 Feet / Min±20

Noise Level    

65 Decibels ± 5% On A Scale

Particle Retention

0.1 Micron

Efficiency    

99.999 %

Pressure Drop 

 23 mm Wg   

Size-At Exhaust   

   6”x  6” x 6”

Pre-Filter     

Non Woven-Synthetic Polyester

Particle Retention   

10 -15 Micron

Efficiency     

90%

Pressure Drop      

 6 mm Wg

Blower Assembly

By 1 No ¼ Hp, Single Phase, 1440 RPM Motor, Directly Coupled With A Pair Of Aluminum Centrifugal Impeller.
Capacity 1000 CFM Pressure 30 mm Wg

Exhaust Assembly 

By Motor of ¼ HP, Single Phase,1440 RPM Motor, Directly Coupled With A Aluminum  
Impeller. Capacity - 300 CFM, Ducting By PVC Pipe With 1 No ¼ HP Motor Blower With Rain Guard-Dia –150 mm           

Ultra Violet Lamp   

  Philips/Osram Make

Illumination      

  LED

Standard Accessories

 Pressure Manometer, Additional Power Point Gas Inlet Nozzle, And Floor Levelling Screws, Wire Cord

Power Supply  

220 V, Single Phase, 50 Hz

Working Area     

W    900 x D 600 x H 600mm
W  1200 x D 600 x H 600mm

 W  1800 x D 600 x H 600mm

 

DESCRIPTION

BIOHAZARD SAFETY CABINET Type B2 Class II                                    
This Type Of Biosafety Cabinet No Circulation Takes Places Inside Workspace And The Blower Will Exhaust All The 100% Of The Filtered Air.

Construction
Made Of Galvanized Iron Powder Coated / Stainless-Steel Sheet. The Work Zone Having Negative Pressure While A Microprocessor Controls Cabinet Functions. Further, An LCD Panel Is Fitted To Display The Monitoring Of The Cabinet Air Flow And A Blower Run Meter Is There To Track Operating Life.

Illumination
Fitted With Light With Optimal Wattage Ultra Violet Light To Ensure High Level Of Cleanliness Before Operation.

Noise Level
Deliver Extremely Low Noise Level Of Less Than 70 db And Also Provide Minimum Vibration Levels.

Filter Assembly
Equipped With Synthetic Pre-Filter Unit Washable And High-Efficiency Filters (Secondary) That Are Made Of Mini Pleated Hepa Non-Woven Fabric. The Filters Deliver An Efficiency Rating Which Is 99.99% At DOP (Cold) And 99.97% At DOP (Hot). Can Hold All Suspended Particles Of Size More Than 0.3 Micron.

Motor And Blower Assembly
Fitted With Balanced Motor And Blower. The Assembly Comes With The Rating Of ¼ HP.


 

In Addition To Normal Feature Of Biosafety Vertical Laminar Flow, It Is Provided With Following Unique Features:
100% Exhaust.
Sliding Sash - Renders Unit Convertible For Use As A Conventional Vertical Laminar Down Flow Clean Air Work Station
Filtered  Exhaust - Protects Ambient Environment, And Avoids Build Up, Air Borne Particles.
Glove Ports And Gauntlets- Permits Working With Medium To High Risk Organisms, Pathogenic Cultures Or That Tend To Aerosolize In Unknown Concentration  
Built In U.V. Germicidal Light-Facilitates Sterilization Of Working Area Before And After Use
Cock-For Gas, Air Or Vacuum  
 

Biosafety cabinet Class II, Type B2 Specification:

Cleanliness       

Class 100

Velocity 

90 Feet / Min±20

Noise Level                  

65 Decibels ± 5% On A Scale

Hepa Filter                 

Media Glass Fiber Paper-Imported
 

Particle Retention              

0.1 Micron

Efficiency   

99.999 %

Pressure Drop                   

23 mm Wg      

Size-At Exhaust               

6”x  6” x 6”

Pre-Filter                         

Non Woven-Synthetic Polyester

Particle Retention            

10 -15 Micron

Efficiency   

90%
 

Pressure Drop                  

6 mm Wg      

Blower Assembly          

By 1 No ¼ Hp, Single Phase, 1440 RPM Motor, Directly Coupled With A Pair Of Aluminum Centrifugal Impeller.Capacity 1000 CFM Pressure 30 mm Wg

Exhaust Assembly        

By Motor of ¼ HP, Single Phase1440 RPM Motor, Directly Coupled With A Aluminum  Impeller.Capacity -300 CFM, Ducting By PVC Pipe With 1 No ¼ HP Motor Blower With Rain Guard-Dia –150 mm           

Ultra Violet Lamp           

3 Feet, 30 Watt – Philips/Osram Make

Illumination        

4 Feet 40 Watt-With Diffusers

Standard Accessories     

Pressure Manometer, Additional Power Point Gas Inlet Nozzle, And Floor Leveling Screws, Wire Chord
 

Power Supply                  

 220 V, Single Phase, 50 Hz

Working Area                 

W    900 x D 600 x H 600mm
W  1200 x D 600 x H 600mm
W  1800 x D 600 x H 600mm