Wed May 08, 2024

Fume Hood Specifications

Fume Hood Specifications

MOC Galvanized Iron Powder Coated, Stainless Steel, Polypropylene.
Type Floor Standing Model / Table Top Model
Face Velocity 90 - 100 FPM /0.5 Mts. Per. Sec. (Average At 12" Sash Opening Fume Hood)
Air Volume 1000 CFM (Designed For Full Door Opening)
Air Flow type Standard
Cabinet Electro Galvanised Sheet with Epoxy Powder Coat Finish / Stainless Steel / Polypropylene With Smooth Finish.
Bottom Arrangements Cabinets, with Cupboard With one Horizontal Partition and Shutters. Cupboards will be provided with Branded Locking Arrangements And Aesthetic Handles Finished With Epoxy Powder Coating.
Baffles Aerodynamic Shape Fully Made Of 3mm FRP.
Work Top Easy To Clean And Chemical And Heat Resistant Black Granite 18mm.
Sash (Shutter) Single, Vertical Sliding, Concealed Type Door. Balanced With Counter Weight, Sash Weights, Wire Etc., Provided With 5mm Thick Glass Window With Steel Frame.
Blower Type Blower Type
Powered by 1 HP 1440 RPM Single Phase.  Blower is sufficient For Maximum Distance Of 10 Mtrs. For Requirement More Than 10 Meters 3 HP Capacity Blower is Required At Extra Cost.
Coupling Direct
Balancing Dynamically Balanced
Air Volume 1000 CFM
Static Pressure 2' W.G.
Casing Casing With FRP Lining
Impeller Fully Moulded PP Impeller
Exhaust Duct PVC/FRP Duct Pipe Of 200 mm Dia with suitable Elbow For A Length Of 2 Meters, Will Be Supplied With The System. will include exhaust Chimney with Weather Cowl, Bends Flanges, Brackets Etc. Additional Length Of Ducting Will Be Supplied At Extra Cost.
Electrical Arrangements 2 Nos. 15/5 Amps 3 Pin Socket Cum Control Switch.
1 No. Switch Button For Blower, 1 No. Illumination Switch. 1 No. Indicating Lamp.
Illumination By 4 Feet Tube Light.
Sink & Tap

Sink with outlet Nipple Single Way / Three way Swan Neck Tap Will Be Provided.


Fume Hood Applications

The major application of a fume hood is fume removal and also minimizing nuisance odors. It is used in laboratory where some major tasks are preformed such as solvent mixing, soldering and working with volatile organics, powder and flammable chemicals, different types of acids and low odor thresholds etc. and all these tasks generate hazardous fumes that are harmful not only environment but also for operator and surrounding people. In this case a Fume Hood crucial important which sucks fumes and throws outside the working environment to maintain acceptable air quality aiming for enhancing safety of personnel as well as laboratory environment.

Customized Fume Hoods

Fume Hood Stations by Accumax India are available in various sizes and dimensions to meet specific requirements of your research. These fume hoods have a choice of vertical or horizontal sliding sash and MS or stainless steel construction. The standard sizes of our fume hoods are available in most demanded requirements (4ft, 5 ft, 6 ft & 8 ft).
Often known as chemical fume hood, these Fume Hoods also dilute effect on flammable gases and vapours. Our product range includes general purpose fume hoods, ductless fume hoods, and mobile units; designed with number of optional features and specifications required to meet critical challenges in laboratory research areas worldwide.


Related Clean Room products